LASER OPTICAL SOURCE 0.85

MODEL: LASERLUX 0.85

• Hand held, powered by a 9 Volts non rechargeable battery.
• Protected against impact, dust and non intentional turn on.
• Cover with rare-earth magnetic lock. Liquid crystal display in a poliesterene box, internally painted with a conductive ink for shield, 4 buttons with tactile feedback (1) on/off, (2) operation mode (continuous/modulated at 1 KHz), (3) increase power, (4) decrease power.
• Very low power consumption - 0,15W typical.
• Very robust; adequate for use in field or lab.
• Compensated against temperature variation. The output optical power drift is less than 0,2 dB in the range of 0oC to 40oC.
• External dimensions: 12cm x 8cm x 5cm.
• Weight: 0,3 Kg approximately.
• Battery duration: Typically 30 hours for continuous operation.
• The only one existing in the international market that exhibits in the LCD the average optical power coupled in 62,5/125 microns optical fiber .
• Optical connector type ST; optionally a cord can be supplied with an adapter for coupling in another type of connector.
• Laserlux 0.85 has two modes of operation: CW and modulated at 1 KHz, square wave.
• Output power is adjustable tipically from a -14 dBm to -4 dBm (measured after 1 m in multimode 62,5/125 fiber ) by nearly 0.25 dB steps. Exhibited power in the display does include evanescent modes.
• Microprocessor controlled.
• Stainless steel frontal panel. Self explicatives laser engraved instructions.
• Permits attenuation measurements in multimode fiber optic links (62.5/125 or 50/125 microns) up to 15 Km (@ 3dB/Km) if utilized together with Luxmeter A or Luxmeter B.
• Specifications can be altered without previous notification.