LASER OPTICAL SOURCE 1.55

MODEL: LASERLUX 1.55

• Hand held, powerred by a 9 Volts non rechargeable battery.
• Protected against impact, dust and non intentional turn on.
• Cover eith rare-earth magnetic lock. Liquid crystal display in a poliesterene box, internally painted with a conductive ink for shield, 4 buttons with tactile feedback (1) on/off, (2) operation mode (continuous or modulated at 1 KHz), 3) increase power, (4) decrease power.
• Very low power consumption - 0,15W typical.
• Very robust; adequate for use in field or lab.
• Compensated against temperature variation. The optical power drift is less than 0,2 dB hours, in the range of 0oC to 40oC.
• External dimensions: 12cm x 8cm x 5cm.
• Weight: 0,3 Kg approximately.
• Battery duration: Typically 30 hours for continuous operation.
• The only one existing in the international market that exhibits in the LCD the average optical power coupled in 9/125 microns fiber .
• Optical connector type FC/APC; optionally a cord can be supplied with an adapter for coupling to another type of connector.
• Laserlux 1.5 has two modes of operation: CW and modulated at 1 KHz, square wave.
• Output power is adjustable tipically from -14 dBm up to 0dBm by 0.25 dB steps.
• Microprocessor controlled.
• Stainless steel frontal panel. Self explicatives laser engraved instructions.
• Permits attenuation measurements in singlemode fiber optic links (9/125 microns) up to nearly 300 Km (@ 0.15dB/Km) if utilized together with Luxmeter B.
• Specifications can be altered without previous notification.