POWER METER

LUXMETER D

• Hand held, powered by a 9 Volts non rechargeable battery.
• Protected against impact, dust and non intentional turn on.
• Cover with rare-earth magnetic lock. Liquid crystal display in a poliestirene box internally painted with metalic ink for shielding, four buttons with tactile feedback, (1) on/off, (2) wavelength selection, (3) dBm or mw selection, (4) absolute or relative measurements.
• Robust, adequate for use in field or lab.
• Important: Accepts only connector FC with any kind of polishing, PC, UPC or APC.
• Luxmeter D has an InGaAs photodiode. It is calibrated at 850 nm, 1300 nm, 1550 nm.
• Sensitivity band: from 700 nm up to 1800 nm.
• External dimensions of Luxmeter A: 12 cm x 8 cm x 5 cm, approximately.
• Weight: 0.3 Kg. approximately.
• Very low power consumption: 0,06 W; battery will last for 100 hours in continuous operation.
• Display exhibits power in dBm or mW.
• Compensated against temperature variation; measured power is kept stable in range 0ºC to 40ºC.
• Measures continuous optical power.
• Display resolution: 0.1dB.
• Microprocessor controlled.
• Measurement range: from -80 dBm up to 0 dBm.
• Frontal panel in stainless steel; laser engraved instructions self explicatives.
• If utilized together with Laserlux 1.3 permits attenuation measurements up to 250 Km (@ 0,3 dB/Km) and up to 500 Km (@ 0.15 dB/Km) if utilized together with the Laserlux 1.55.
• Compatible with 9/125, 50/125 and 62,5/125 micra fiber.
• Calibration certified promulgated by the fabricant by comparison with international instruments recently calibrated.
• Specifications can be altered without previous notification.